NOTE: Product Images are shown for illustrative purposes only and may differ from the actual product.
NOTE: If you buy any PNP Drone from our website and any part of your drone gets damaged while you are using it then we will arrange those parts for you and if that parts manufacturing has been stopping then we will provide you reference product.
DON’T JUST FLY DRONES, CRASH THEM TOO BECAUSE WE ARE HERE FOR YOU.
Master 5 Freestyle 4-6s Analog FPV Drone – PNP
Features:
• Replaceable arms for quick disassembly without taking apart the whole frame.
• Universal GOPRO installation bracket so that you can use any GoPro Camera and Action Camera.
• Honeycomb-shaped aluminium alloy cooling speeds up the heat dissipation under the VTX.
• Innovative Independent Anti-shock stack Fixed Structure.
• Honeycomb-shaped CNC 7075 magnesium aluminium alloy camera mount side plate.
• Configure your FC and ESC via Bluetooth on your phone and Experience wireless fully configuration anytime & anywhere.
Specification:
Model: 5 inches Frame
Wheelbase: 222mm
Size: 225*210mm
TPU Colour: Yellow
Arm thickness: 5mm
Prope size: 5inch
MCU: STM32F405
USB Port Type: Type-C
Supported Fc Firmware: BetaFlight(Default),INAV
UART: 6sets
Power input: 3-6s lipo
Firmware: BLHeli_S JH50
Configuration: Wireless Configuration
Continuous Current: 50A*4
Burst Current: 55A(5seconds)
ESC Protocol: DSHOT300/600
Input Voltage: 3-6S Lipo
Capacitor: 35v 1000uf low ESR
Output Power: PIT/25mW/200mW/400mW/800mW
Input Voltage: 3.7V-5V
Antenna: MMCX
Image Sensor: 1/2.8″ Starlight COMS Sensor
Horizontal Resolution: 1500TVL
Signal System: NTSC/PAL
Power: DC 5-36V
Dimension: 19mm
Gain: 2.82dBi
Frequency: 5.8GHz
Polarization: RHCP
Connector: SMA
Model: Flash 2406
KV: 1950KV
Input Voltage: 6S Lipo
Colour: Gold
Size: 51466
Colour: Bumble Bee
Type: tri blade
Dimension: 98*10MM
Colour: Yellow
PACKAGE INCLUDE:
1× Master 5 V1 Frame
1× F405 V3 Flight Controller
1× F405 BLS 50A 4-in-1 ESC
1× TX800 VTX
1× Phoenix 2 SP V3
1× 5.8 GHz SMA Antenna V2
4× FlyfishRC flash 2406 1950 KV Motor
4× Propeller
4× Wire protector tube Set
2× 250mm Battery strap
1× TPU Base Mount
Recommended Parts:
Radio Transmitter:
•
•
•
•
•
Radio Receiver:
Goggles support – Analog
Video Receiver
Battery Support 4S-6S Lipo (suggested: 1300mah-2000mah)
4s lipo Battery
6S lipo Battery
Battery Charger
Antenna for Goggles:
Action Camera:
Accessories:
